Iwata LPH 400
- Atomizing PSI: 16.0
- Air Cap Model: LV4
- Requires CFM: 9.5
- Weighs 0.86 lbs!
- Nozzle 1.4 inch (0.055)
- Pattern width 11.4″
I get commissions from links in this post
There’s spray guns, and then there’s IWATA spray guns and the IWATA LPH400.
Iwata spray guns are no joke. These tools are engineered to the highest standards by Anest Iwata in Japan, where precision and performance are part of the culture.
The entire Iwata lineup isn’t for the faint of heart. They’re pricey. They’re solid. And they’re built to last.
Iwata guns are made for people like you—folks chasing the absolute best results every single time. This is one serious piece of equipment.
Enter the IWATA LPH400 – 144LV.
IWATA LHP400 Tech Specs
Max working pressure 98 PSI
Decibels 69.4
Best Operating Temp 41 F to 104 F (5-40C)
PSI 16, 10 PSI to the cap
Fluid Output ml/min 130
Pattern width 11.4″
Weigh 0.84 lbs
Iwata LPH400 CFM Requirements: 9.5
Cap Model HVLP – LV4
Iwata Spray Gun for Clear: Best in Class Results
This one’s a clear coat and basecoat workhorse. Most folks lean on the 1.4 mm tip, and for good reason; it absolutely delivers when it comes to getting that glassy, high-gloss clearcoat. According to Iwata, the 1.4 mm tip is ideal for that kind of finish.
That said, a lot of painters swear by it for basecoat too. Everyone’s got their own process for getting pro-level results. Some even use their Iwata as a primer gun; that can work just fine as long as your primer is thinned properly.
While some painters reserve theirs for detail work, repairs, or single panel jobs, most use the Iwata as their everyday go-to for automotive clearcoating.
And it’s not just for cars. Plenty of folks use these for woodworking projects and household painting. The gravity feed setup and low pressure help keep overspray down, which saves paint and leaves a softer, more refined finish. If you’re painting cabinets, this would be a solid choice.
Lightweight
Quality Build
Whisper Quiet
Large Investment
Why Buy an IWATA LPH400?
Quality construction equals longevity. You will get what you pay for here with a spray gun that lasts forever. It doesn’t even weigh 1 lb (without the cup) so you’ll never have wrist fatigue or downtime.
You can get more painting done in an 8hr period. Time is money if you’re running a shop or an independent autobody contractor. We like the Iwata not only for pros but as the best automotive paint gun for beginners as well. It provides an unrivaled spraying learning experience.
The Anest Iwata let’s you pick your own cup size so you can customize your gun for your painting needs. You have the option of the following cup sizes with the IWATA LPH400, click on the blue links to take you direct to purchase.
- PCG10EM 1000ml/1 quart Aluminum (IWA-6034E)
- PCG7EM 700ml (.75 of a quart) Aluminum (IWA-6033E)
- PCG6PM 600ml Plastic (IWA-6000)
Also, if you don’t have one already, you will need to grab yourself a quality air regulator.
Level Up Your Painting DIY and Get Tips to Your Email
Best Settings for Your new IWATA Spray Gun
The fluid settings controls are easy to access and adjust as are the fan settings. There are even numbers on the knobs so you know how much you’ve dialed it in.
For spraying clear, its recommended to try winding your fan control out all the way and then dialing it in 2 full turns.
For fluid, wind the knob on your IWATA all the way in, then out 2.5 – 3.5 turns. The temperature and your spray environment both inside and outside the booth, will affect the fluid setting you use.
You will have to experiment and find the right setting within the recommended range.
Set your air pressure regulator about 2 bar (should be about 29 PSI) Anything less than 2 bar and you will see some orange peel results because the pressure it too low and the paint isn’t being atomized correctly.
Iwata Spray Gun Manual
If you’re looking for the basic instructions for this gun, you’ll find them at Anestaiwata.com.
Conclusion Iwata LPH400
If you’re looking for the best line of spray guns, then look no further. The IWATA LPH400 and the IWATA Spray Gun line deliver a high end spraying experience unmatched in the automotive spraying industry.
If you’re looking for a few more options in the automotive paint spraying space, check out the other sprayers we tested and reviewed by clicking on the button below.
Join our Email List for Tips and Tricks!
- Iwata LPH 400
- IWATA LHP400 Tech Specs
- Iwata Spray Gun for Clear: Best in Class Results
- Why Buy an IWATA LPH400?
- Level Up Your Painting DIY and Get Tips to Your Email
- Best Settings for Your new IWATA Spray Gun
- Iwata Spray Gun Manual
- Conclusion Iwata LPH400
- FAQs Iwata LPH400
- Join our Email List for Tips and Tricks!
FAQs Iwata LPH400
Check out our detailed reviews of the best gravity feed paint sprayers on the market.