With the best paint sprayer for furniture, you’ll be able to create a new look quickly, affordably, and with little effort.
Many models in this category allow you to distribute more than just paint. You could apply stains, lacquers, or even enamel if you need a hard surface.
That way you can create the perfect end result every single time.
Best Paint Sprayer for Furniture
The units that work best for furniture focus on precision. They allow users to create specific results with consistency, so the perfect look can be achieved.
These are the best paint sprayers for furniture that are currently available.
Best Paint Sprayers for Furniture: Editor’s Reviews
Best All Round Paint Sprayer for Furniture
- Easy to Clean
- HVLP Siphon Feed Spray Gun
- Adjustable Settings and Spray Patterns
- Comes with 3 tips
- Perfect for beginners and Pros
Take your crafts to the next level with this HVLP paint sprayer from HomeRight.
Make sure that you give the Super Finish Max a closer look. It offers the same functionality as the top models in the industry, but for a fraction of the price. It even requires less thinning that high-level models. If you want to start staining right away, this model will accommodate you. The lower levels of pressure with this HVLP model mean that you have less overspray to worry about.
Right out of the box, the HomeRight Super Finish Max has multiple spray settings that help you conquer more projects. You can also buy more spray tips making it even more versatile.
The Super Max comes with a 450 watt turbine motor. When paired with an interchangeable tip, most paint mediums can be sprayed. Three brass spray tips are included: 1.5, 2.0, and 4mm.
You can tackle your entire staining to-do list with this strong and lightweight sprayer.
Always pay attention to the connectors that you use on your HomeRight HVLP Sprayer. Some models offer users a connector that is smaller in diameter than the air hose that connects to the unit.
Because this is a restriction to the flow of the paint or other substance, pressure can build up at the connection and cause issues.
This sprayers design which combines HVLP and Siphon feed elements, keeps your spray pressure consistent as you’re painting, staining, or varnishing, helping you to create that professional-looking finish.
We also like the ergonomic improvements that were included within the design.
You also receive an air-blowing nozzle with this particular model. If you run this nozzle without a finish, then you receive a tight stream of air that you can use for cleaning out home electronics, underneath tables and chairs, and other tight spaces where dust bunnies tend to collect.
At just 3 pounds, your grip isn’t going to get tired as you’re working and this helps you to get through projects a bit quicker than you could with other models. Some craft sprayers do weighs less than this model, but they are a bit cheaper and don’t deliver the same results on furniture and larger woodworking projects.
Combine that with the brass nozzle for added durability and you can have confidence in the results you’re producing.
The 40 ounce cup is bigger than most other models (which have 32 ounce paint cups), and you should be able to cover about 90-100 square feet of paint area with one cup.
Editor’s Choice Runner Up: Best Paint Sprayer for Furniture
- 2 stage turbine: no compressor needed
- Fan width 1/2″ to 12″
- Pressure and flow control adjustable
- 20 foot hose
- Sprays stains and latex
- 2 nozzles included: one for smooth and one for semi smooth finish
This model by Wagner is extremely reliable to get the job done, without breaking your budget. No matter what type of paint or stain you choose to spray, the Wagner Control Spray Max HVLP Sprayer gives you options.
You can spray a pattern of ½-inch in size to 1 foot in size with the same optimal levels of control.
You can take advantage of fine finish work because of the high volume, low pressure design. At the same time, you’re given a 20-foot flexible air hose that extends your reach as you work.
Wagner suggests that you can thin latex paint by 10% to 20% to achieve the finish that you want. We found that for some latex paint options, you may need to thin it by up to 40%. That means you’ve got to pay close attention to your spray to avoid clogging issues.
More overspray occurs with thinner materials, so take caution when spraying stains especially.
Painting a bedroom wall, for example, would not be feasible with this equipment. You wouldn’t want to take it outside to paint a fence. Painting the exterior of a home? Forget about it.
Priming is the issue that we found with this particular paint sprayer. If you do not take the time to properly prime the equipment, your results will be less than desirable.
Best Budget Furniture Paint Sprayer
- Best for small furniture and crafts
- Requires 3 CFM at 90 psi
- Use with paints, stains, lacquers, and more
- Includes siphon gun, tube, 16-ounce Mason jar, jar gasket
With the Critter Spray Products Siphon Gun, you’re able to find a use for those leftover Mason jars or canning jars.
This siphon gun is a surprisingly good value. It allows you to convert one of those old canning jars you’ve got lying around into a paint container.
Use this paint sprayer to apply lacquers, stains, or paints with ease. You’ll need to mount the spray gun kit to a compressor for it to work properly, with a minimum requirement of ¾ HP.
This paint sprayer is best suited for spraying furniture, cabinets and crafts. If you have larger DIY projects, you will want to invest in a more heavy duty painter with larger capacity cups, better balance and more durable gaskets.
It is designed to work with 16-ounce jars, but you can adapt it to work with other models with a few minutes of work. If you already have the equipment, give this paint sprayer a try today and we think you’ll be quite pleased.
When you’re done using this siphon gun and you’ve cleaned it up appropriately, then the hook grip on the handle of the product can also double as a method for hanging the tool up in your workshop or garage.
The gasket does not have a long life. You’ll find the gasket wears out pretty quickly with this siphon gun.
You’ve got a couple of options for sealing your connection with the Mason jar when that happens. You can cut some wax paper out to create your own temporary gasket or you can use the product without a gasket. You can also buy this maintenance kit from Critter Spray to cover all your bases when it comes to maintenance.
Avoid using rubber gaskets if you’re using solvent finishes.
In return, you’ll receive a home paint sprayer that can handle lacquers, stains, and paints with relative ease for a great price. It can feel a little top heavy if you’re using a full Mason jar for your finishing work.
- Best for decorative painting, furniture and crafts
- No compressor needed
- Sprays chalks and milk paint
- 6 foot hose
This little unit is perfect for those projects that require decorative paints. It does an excellent job on models. Pinewood Derby cars look fantastic after being treated with this tool. This Wagner sprayer is great for spraying chalk and milk paints onto your furniture. Please note that some paints will still require thinning.
The Wagner Home Decor Paint Sprayer is so easy to use too. The nozzle provides you with 3 spray patterns. There is a material flow dial that let’s you customize the amount of paint flowing through your sprayer to get the ultimate finish.
All you’ve got to do is fill it with paint and you’re ready to go. The 6 foot hose gives you plenty of room to move around your project. You also don’t have the same priming headaches that other sprayers tend to cause.
You’ll save a ton of time compared to the hand-painting you’re already doing, while the cost is still very manageable. This unit only weighs around 5 pounds, and paired with the easy carry handle, you can take it almost anywhere.
The 20 ounce plastic cup is a bit limiting in that you may need to refill when painting larger piece of furniture. The all plastic construction is not something we like, we would have liked to see sturdy metal construction for longevity.
As an added bonus, when you get things right, there are no brush marks on your final project. It’s a definite winner.
- Best for small or large jobs
- 0.7 and 2.1 CFM guns
- Adjustable paint flow
- Includes cleaning kit
- Operate at 40 PSI
- 10 paint filters included
This gravity feed paint spray kit gives you everything you need to get started on your next craft painting project.
Two spray guns in this Campbell Hausfeld Kit give you versatility. You can paint a variety of projects, including furniture, woodworking, cars, etc. The two spray guns require 2.1 CFM and 0.7 CFM at 40 PSI. The air requirements mean you can use a smaller and probably cheaper air compressor with these guns.
Make sure that if you’re painting something that requires a wet edge that your compressor is big enough. You don’t want to stop painting while you wait for your compressor to catch up. Some 5-6 gallon compressors won’t keep up with these guns, so beware.
Two sizes of paint containers let you work on small projects or large ones. The design of these guns and the softer spray makes less overspray and provides fine finish details with smoother results.
The dual adjusting valves give you awesome control over the paint consistency at all times. The gravity feed cup on the main gun is 550ml and the touch up gravity feed spray gun has a 120ml cup.
There are 15 total paint filters included, with 5 in-line paint filters as part of the total. This craft painting kit even comes with 3 cleaning brushes.
Paint consistency is easy to control due to the gravity feed.
We didn’t like that the fan adjustments were not as consistent as we needed them to be. Folks have also reported that the pressure gauge doesn’t work all the time and you can’t seem to adjust it properly. I found that the trigger is a bit heavy and stiff to pull as well, which may cause hand and wrist fatigue in some painters.
You’ve got thread tape. There’s even a wrench included to make sure you’ve got a tight connection.
What more could you need?
- 4 spray nozzle sizes included: 1.5, 2, 2.5 and 3mm
- Will Spray thinned latex
- 3 adjustable spray patterns
- 40 ounce cup
- 500 watt motor
This brilliant little sprayer offers a 40 ounce detachable container, a durable plastic housing, and enough pressure to spray even properly thinned latex. Neu Master claims you can paint 54 sq feet with a full paint cup: we found it to be a bit less, depending on your spraying skills.
You can find a few options on this cheap sprayer that normally come on more expensive versions. We are happy that such options are found on an entry level sprayer. This sprayer will spray everything from stains to latex to polyurethane and other finishes.
At 3.5 pounds, this sprayer is well balanced and weighs about half of what the other sprayers in this category weigh, reducing wrist fatigue.
We found the cord to be a bit short at 6.65 feet, so grab an extension cord before you get started.
Users have reported that this unit leaks when you hold it in a non-horizontal position unless all the parts are screwed on extremely tight. If you have to paint upside down or at an angle, this unit may not be for you.
We recommend straining your paint at all times before spraying but especially with budget models like this one.
The Neu Master Kit includes:
- 1 * HVLP Paint Sprayer with 1200ML container
- 4 * Size Nozzles (1.5/2.0/2.5/3.0 mm)
- 1 * Viscosity Cup
- 1 * Cleaning Brush
- 1 * Cleaning Needle
- 1 * User Manual
You can adjust the spray patterns from vertical to horizontal to circular to achieve the perfect spray pattern for your project. There is also a material control knob to easily dial in the correct settings for your chosen spray pattern.
With the 4 different nozzles included, you can paint anything from sealers, stains, to primer and oil enamels.
If you’re shopping on a tight budget, this is the best cheap paint sprayer you’ll be able to buy. When you need a good paint sprayer to finish a project, give this one a closer look.
Best Selling Paint Sprayer
- Good for large and small jobs
- 3 spray patterns
- 3 nozzles included
- Good value for your money
This HVLP spray gun is surprisingly versatile. With a flow rate of 750ml per minute, you’ll be able to get more done than you would with a roller for your next project.
4 different nozzles, make it possible to meet the needs of almost any project: 1.5mm/2.0mm/2.5mm/3.0mm. You get 3 spray patterns with this sprayer, vertical, horizontal and round, which works with all projects.
This workhorse can work with a ton of materials from stain and varnish to the paints you need to spray. The 750 ml flow rate (just less than a quarter of a galloon) covers your projects in paint faster than we expected from such a budget cabinet sprayer.
We didn’t like that the power cord is only 6.6 feet long, but you can just pair it with an extension cord to get around all of your projects.
Nice for beginners, is that it comes with an easy squeeze trigger to prevent fatigue. On the downside, this unit is a bit heavy at over 3 pounds.
You can use the Rexbeti to work on dressers, furniture, crafts, or even that room you’ve always wanted to paint. Small jobs are great for this sprayer.
Included in the package is:
- 1 * Rexbeti hvlp Paint Sprayer
- 1 * User Manual
- 1 * Paint Container
- 1 * Viscosity cup
- 1 * Cleaning Needle
- 4 * Nozzles
- 5* Paint Strainers
One of the best value purchases that is available today.
- Best for lacquers and enamels
- Made of metal
- Fluid Control
- Aluminum build
- 1 Quart Cup
This unit from Campbell Hausfeld sprays thinner materials like lacquers and poly really well. High solid lacquers and latex paint (even thinned) probably not.
Comes with 1.4 mm tip. Lightweight gun at around 2 lbs. You get a cup size of 600 cc/ 1 quart so perfect for small DIY projects like furniture or crafts.
Polished aluminum sprayer housing means clean up is pretty fast. Be careful not to drop this gun, the body is rather fragile and it will break when it hits the ground.
This unit is convertible from non bleeder to bleeder style for use with multiple types of air compressors. Fluid control lets you dial in the amount of material sprayed for accurate results.
Unfortunately, the siphon tube cannot be rotated, for flat overhead spraying so we don’t recommend this unit for ceilings.
Once again, you get what you pay for.
Can Wood Furniture be Spray Painted?
So you’ve built yourself some beautiful wood furniture. You definitively want to paint or stain it right. Spraying your wood furniture with a paint sprayer will leave a nice soft and even finish, getting into all the weird little spaces and places that can be hard to reach with a brush or roller.
Is it Better to Brush or Spray Paint Furniture? Is a Paint Sprayer worth it for Furniture?
Using a brush, roller, or a can of spray paint on your furniture project can leave uneven paint, brush marks and runs.
Furniture sprayers deliver smooth results, with even texture that look more professional than using a brush, roller or spray paint from a can. So we vote for using a paint sprayer on your furniture. It’s worth it.
Do I need to Primer Furniture before Painting?
We recommend that you prime any surface that you’re going to paint. This keeps any stains, tannins, or odor from bleeding through your paint. If also helps your top coat of paint to adhere better to that surface you’re painting. It gives a smoother, more consistent finish than painting over unprimed furniture. It will also make your paint job last longer, and resist chipping, especially on high use furnishings, like chairs and tables.
Why Use a Paint Sprayer to Paint Furniture?
When you spray furniture, the paint is applied evenly on your surface and it gets into the tiny nooks and crannies of the detailed parts like the legs and corners of your project easily.
Paint Sprayers for furniture lay down thinner coats so the drying time is faster than with a brush or roller.
You can also get each coat painted faster, because a sprayer covers more or your surface in less time.
Can You Spray Paint Furniture without Sanding?
You CAN, but you shouldn’t. You should sand your paint surface, clean it, then apply a coat of primer for your preferred paint. Once the primer is dry, you sand the primer a bit to scuff it up. Clean it and then spray your chosen paint over the primer. You may have to repeat the last step twice, because you might need 2 coats of paint.
If you skip the sanding part, your paint and primer won’t adhere as well to your surface and the coats won’t adhere to each other as well. Your paint might start wearing out or chipping off very soon after painting.
Features to Look for in Spray Painters for Furniture
Controls that are positioned on the gun so you can make adjustments on the fly will increase the quality of your paint job. No one wants to fiddle with controls and be distracted while painting.
Can Spray at Weird Angles or Upside Down
Spraying crafts isn’t like spraying a wall. You have to paint at weird angles, into tiny little areas, with precision and skill. You want a spray gun that works in these situations and won’t ruin your project.
A spray gun that can spray all sorts of paints and materials is the best. It will save you having to buy multiples spray guns for all your projects.
This one is obvious, but steel parts protect against rust and last longer than plastic parts.
Some sprayers have higher levels of overspray than other types of spray guns. Check the specs and make sure the overspray level is low for the gun you buy.
If there are lots of tips available or your airless sprayer, you will be able to conquer a lot more painting projects with the same gun. Brand name tips usually are better quality and last longer too.
What is the Best Paint Sprayer for Furniture: Our Recommended Furniture Sprayer
We recommend using an HVLP paint sprayer for your furniture projects. They are known for delivering precision on impact. The favorite from our list above is the HomeRight Super Finish Max.
You can control spray patterns and the flow of fluid through this sprayer. Overspray is minimized because of the low pressure.
The low-pressure sprays a finer mist than an airless paint sprayer, meaning that your paint is applied in a smoother, softer finish perfect for furniture. The HomeRight Super Finish is great for beginners and experts alike.
It can spray a variety of materials from thinned latex to varnishes and stains because it comes with a few different sized tips/nozzles. Unless you grab an HVLP turbine system, you will need an air compressor to spray paint with an HVLP spray gun.
We review the top air compressors for paint sprayers to take the guesswork out of your next project.
|Up to 90% Paint Transfer Rate|
|Sprays a ton of Materials|
|Low Operating PSI|
What is the Best Type of Paint Spray Gun for Furniture?
I recommend either an HVLP or LVLP gravity feed spray gun for beginner furniture painters or an airless for the more experienced. You will find the gravity feed HVLPs produce a soft, smooth and consistent finish throughout your pass over your project. Airless sprayers are usually siphon feed and can produce less consistent results if your technique isn’t down pat.
High Volume Low Pressure (HVLP) Paint Gun
HVLP sprayers use pressurized air and vacuum pressure to create the atomization effect. The air sources are located next to the nozzle, which draws paint from the resource container toward the tip for dispersion. We recommend this type of indoor paint sprayer for everyone. Simple to use and handle.
Once the stream is dispersed, the pressure separates the paint into the spray that applies to your surface.
HVLP paint sprayers also offer these advantages when painting walls.
- Spraying distances limited to maximum 6 inches.
- Detailed work where overspray is not a concern.
- Compatibility with stains and most paint types.
Choosing HVLP or airless sprayers depends on the specifics of your spraying projects.
HVLP sprayers are a better option when coverage is more important than precision. Imagine that you’re painting the leg of a chair. You don’t care if paint goes to either side.
You just want precision at impact and that’s what this design provides.
Don’t forget to cover the area that you want to protect from paint with a drop cloth to keep it from getting any overspray from your paint sprayer.
Airless Paint Gun
Airless sprayers use high levels of energy to force paint out of the tip to create a fine spray. We recommend airless paint sprayers for folks with more spraying experience.
It emerges from the sprayer in a pattern stream that is based on the tip used and the strength of pressure being commanded from the trigger.
Once the stream hits the air, it atomizes to create paint droplets that eventually impact the surface being painted to create a clean and consistent look.
Airless paint sprayers provide more consistency throughout the entirety of the spray. That gives you more control over the final outcome.
Airless sprayers can cover more square feet than other types because they spray at 2000+ PSI. You also save time because you don’t have to thin most paints and primers with an airless unit. At the same time, you know that you will have fewer touch-ups that need to happen after you get the painting done.
Airless sprayers also feature these advantages when painting walls.
- Spraying distances of up to 12 inches.
- A reduction in paint thinning.
- Large-scale uniform paint coverage.
Both options require masking before spraying the area. You’ll likely want to strain or filter your paint before using it as well for best results.
LVLP Paint Sprayers
LVLP means low volume, low pressure.
They work at a lower pressure than even HVLP, at around 10 PSI or less. Because of the low pressure they lay down a soft finish. It also minimizes overspray (paint waste), saving you cashola on paint.
LVLP’s don’t require much experience to use them.
Gravity Feed Paint Guns and Painting Indoors
A gravity feed paint gun means that the cup sits on the top of your paint gun. Then, gravity feeds the paint into your gun. Any paint sprayer can be gravity feed, including HVLP paint sprayers. They require less air pressure to operate so there is less overspray.
This results in a better finish because more paint is reaching your surface.
Gravity feed paint sprayers are better for detailed work, rather than larger projects like interior walls and doors. Some of them come with cups that are too small for most interior paint projects.
Spraying latex is not what this type of feed gun is made for so forget about your indoor walls. Gravity feed guns really shines at applying coatings.
Siphon Feed or Conventional Paint Guns
These pull the paint up from below the gun. They need more air pressure than gravity feed so there is more paint waste and less efficient paint transfer to your surface. Modern HVLP designs have all but replaced this type of sprayer.
Also great with coatings and specialized materials, but not so much for your basic indoor paint work.
Why Use a Paint Sprayer for Furniture?
Paint sprayers deliver a smoother finish than using a brush or roller. The coats of paint are thinner so they dry faster, allowing you to do multiple coats in a shorter amount of time. Rollers can leave uneven paint finishes and typically, the finish won’t be as smooth as using a paint sprayer. Leave the rollers for larger surfaces like walls.
How to Get a Smooth Finish with a Furniture Spray Gun
Smooth and professional looking results come from doing your prep work and using the right tools for the job.
You have to use the right spray tip, sand and fix blemishes on your furniture, prime with a good brand name primer, sand between coats, use a tough type of paint, and have the patience to wait for your primer and paint to dry.
The right sprayer along with proper painting technique, will make your furniture look amazing.
Always use quality primer and paint with the right spray tip for your furniture to get the smooth results you are looking for.
Best Spray Patterns for Furniture
Spray patterns is the shape of the paint that is released from your paint sprayer.
Most sprayers should come with an option to change the spray pattern from horizontal, to vertical, to circular/round. This allows you to choose the perfect pattern for your painting project.
For painting left to right or right to left, use a vertical spray pattern. The horizontal pattern should be used when spraying up and down.
The round pattern is best used for cylindrical shapes like furniture and furniture legs. You must move your paint sprayer faster with this pattern to prevent runs.
Best Fan Widths and Distance from Furniture to Achieve Good Results
If you’re painting a furniture leg, or something that is narrow, you will want to have a narrower fan width. This helps to get a smooth result and reduces paint overspray waste. You want to stay anywhere from 4 to 12 inches away from your paint surface. Too close could result in splotchy results and paint run. Experiment and practice on a piece of cardboard or old wood for awhile before painting your surface.
Can I Spray Wooden Furniture?
You can spray so many different types of furniture materials, including wood. Here is a list of the types of furniture build materials that can be sprayed.
- And Many More….
Best Spray Tip for Spraying Furniture
There are many different opinions on which spray tip is the best for painting furniture.
Whatever tip everyone else chooses, we can agree that a fine finish tip with a smaller orifice that makes a soft spray is the best to achieve a silky smooth finish. This is because the paint is atomized better.
Also, use a low pressure setting. Higher pressure will make your paint come out with more speed, leading to a not so smooth finish.
A few recommended tips for your furniture: 210, 311, and 315 or 1.4mm, 1.5mm, 1.6mm as long as the tip is for fine finishing/detail projects.
Remember, with a smaller tip you will need to thin down thicker paints such as latex MORE than with a larger tip. Trying to run thick paint through a small tip leads to clogging and orange peel results.
Thinning down your paint means more coats, but you will get a super smooth finish with a smaller tip.
How to Set Up a Spray Booth
To paint your furniture and crafts without a dedicated workshop or garage may seem impossible, but not when you can purchase a paint shelter! It looks just like a camping tent and it’s super easy to set up.
Check out the Wagner Spray Booth to see how easy it is!
How to Prep Furniture for Spraying
Before using a furniture spray painter, it is important that you sand your furniture first.
Ignore the tutorials that you can find online that say otherwise. All surfaces must be sanded with a maximum 150-grit sandpaper if there is existing stain or paint.
If you have varnish on the furniture, you’ll need to use an 80-grit sandpaper.
Once you have sanded the furniture, inspect it for flaws. There may be scratches, dings, gouges, and other imperfections that have been picked up over time.
Use a wood filler on these items to create a smooth surface. Trying to sand out deep scratches will only create malformations in the surface.
Then use a wet, clean, and lint-free cloth to remove any residue. Do not use a paper towel. At this point, you’re ready to apply a primer. Some paint sprayers can apply the primer for you, but it may be beneficial to apply it by hand.
You’re going to need to sand away drips before applying the paint anyway. Once you’ve got a smooth, primed surface, then your furniture is ready to be painted with your new equipment.
Join our Email List for more Tips and Info!
Useful Tips for Spraying Furniture
Using a paint sprayer on your interior or exterior walls is a very different process than fine furniture spraying.
Here are some tips to follow to make sure you have the best possible experience with your upcoming project.
- Use a matching primer. The primer you use on your furniture must match the type of paint that you use. A latex primer will not mix with an oil-based paint. Once you’ve primed the surface, you must paint it. Otherwise, you’re stuck starting over from the beginning.
- Prime all painting surfaces. Most furniture has been stained to give it the color it has. Without primer on top of this stain, it tends to bleed through the paint over time. That’s why it is so important to have primer on all surfaces before you begin painting.
- Ventilate your working area. This is especially true if you choose to work with an oil-based primer. The odor is strong and can cause breathing problems with prolonged exposure. Be sure to use personal protective equipment, such as a respirator, while you work as well.
- Use the 50/50 paint technique. This means you always overlap your last sprayer pass by 50%. This ensures consistent coverage with a smooth finish.
- Arm Movements. Always move your entire arm when making a spray pass and not just your wrist to ensure flawless paint strokes.
When spraying furniture, it is a best practice to start at the top and work your way down. Most people actually start at the bottom and work their way up.
If you begin at the top, it is much easier to work out paint runs that may form when using the sprayer. Keep a brush or roller available so you can smooth out the surface if the run forms.
Pros and Cons of Using Furniture Spray Guns
Best Paint for Furniture: What is the Best Kind of Paint to use on Furniture
What paint do I use to paint furniture? Enamel is the best paint to spray furniture because of its harder surface. That makes it easier to clean and creates a scratch-resistant surface.
Oil-based paint is a cheaper option that requires a little extra maintenance, but is still quite durable and reasonably easy to clean.
What to Budget for the Best Furniture Paint Sprayer
The best paint sprayers for furniture are surprisingly affordable. The average person will find the equipment they need for $100 or less.
There are several good models in this category that are priced in the $50 range. You can also have advanced models for interior painting pull double-duty as a furniture paint sprayer as well.
Although top interior sprayers can be priced above $700, the versatility of the equipment can make it a good investment in certain circumstances.
What size Air Compressor Do I need to Paint Furniture?
It’s not the size of the compressor that matters, but the CFM’s and PSI required to the nozzle. Each manufacturer has different requirements so there isn’t a cut and dry answer here. Take a look at the instructions for your sprayer before you buy to make sure your compressor can power it.
The best paint sprayer for furniture will let you take advantage of your hobbies while creating the perfect look.
No matter what your carpentry needs may be, these sprayers will get the job done. Many will even pull double-duty with multiple hobbies. That’s why there is so much to love in this category.
A brush or roller will leave uneven paint, marks and runs. With a sprayer, you get even paint, into the tiny corners, and the paint dries faster. They also deliver smoother looking finish.
- Best Paint Sprayer for Furniture
- Best Paint Sprayers for Furniture: Editor's Reviews
- Best All Round Paint Sprayer for Furniture
- HomeRight Super Finish Max
- Editor's Choice Runner Up: Best Paint Sprayer for Furniture
- Wagner Control Max
- Best Budget Furniture Paint Sprayer
- Critter Spray Products
- Wagner Home Décor Paint Sprayer
- Campbell Hausfeld
- Neu Master
- Best Selling Paint Sprayer
- Rexbeti Ultimate HVLP Spray Gun
- Campbell Hausfeld Gravity Feed Spray Gun
- Can Wood Furniture be Spray Painted?
- Is it Better to Brush or Spray Paint Furniture? Is a Paint Sprayer worth it for Furniture?
- Do I need to Primer Furniture before Painting?
- Why Use a Paint Sprayer to Paint Furniture?
- Can You Spray Paint Furniture without Sanding?
- Features to Look for in Spray Painters for Furniture
- What is the Best Paint Sprayer for Furniture: Our Recommended Furniture Sprayer
- What is the Best Type of Paint Spray Gun for Furniture?
- LVLP Paint Sprayers
- Gravity Feed Paint Guns and Painting Indoors
- Siphon Feed or Conventional Paint Guns
- Why Use a Paint Sprayer for Furniture?
- How to Get a Smooth Finish with a Furniture Spray Gun
- Best Spray Patterns for Furniture
- Best Fan Widths and Distance from Furniture to Achieve Good Results
- Can I Spray Wooden Furniture?
- Best Spray Tip for Spraying Furniture
- How to Set Up a Spray Booth
- How to Prep Furniture for Spraying
- Join our Email List for more Tips and Info!
- Useful Tips for Spraying Furniture
- Pros and Cons of Using Furniture Spray Guns
- Best Paint for Furniture: What is the Best Kind of Paint to use on Furniture
- What to Budget for the Best Furniture Paint Sprayer
- What size Air Compressor Do I need to Paint Furniture?
- Quick FAQs